The Advantages Of Pneumatic Pumps

Mar 22, 2024 Leave a message

1. Since air is used as the power, the flow rate is automatically adjusted with changes in back pressure (outlet resistance), and is suitable for medium and high viscosity fluids. The working point of the centrifugal pump is set on the basis of water. If it is used for fluid with a slightly higher viscosity, it needs to be equipped with a reducer or a frequency converter. The cost is greatly improved, and the same is true for the gear pump.

 

2. Pneumatic diaphragm pump is reliable and low cost in the flammable and explosive environment, such as fuel, gunpowder and explosive. Because: first, it is impossible to generate spark after grounding; second, no heat is generated during work. The machine will not overheat; third, the fluid will not overheat because the diaphragm pump has minimal agitation of the fluid.

 

3. In places with poor construction sites, such as construction site, industrial and mining waste water discharge, due to the impurities in the sewage and complex components, the pipeline is prone to blockage, so that the load on the electric pump is too high, and the motor is hot and vulnerable. The pneumatic diaphragm pump can pass through the particles and the flow rate is adjustable, and the pipe is automatically stopped to be unobstructed when the pipe is blocked.

 

4. In addition, the pneumatic diaphragm pump is small in size and easy to move. It does not need foundation, and it occupies a very small ground. It is simple and economical to install. Can be used as a mobile material transfer pump.

 

5. In the treatment of hazardous and corrosive materials, the diaphragm pump can completely separate the material from the outside world.

 

6. Pneumatic diaphragm pump can be used to transport fluids with relatively unstable chemical properties, such as: photosensitive materials, flocculation liquids, etc. This is because the diaphragm pump has a low shear force and a small physical impact on the material.