The Main Differences In The Application Of Pump Stroke Counters (Mainly The BC-200A Type) Between Offshore Drilling Platforms And Onshore Drilling Environments.

Jul 30, 2025 Leave a message

ⅠThe Difference Between Environmental Adaptability and Protection Requirements

Waterproof and corrosion-resistant properties

1.1 Offshore Platform:

The offshore environment has high humidity and strong salt fog corrosion, and there is a risk of seawater splashing or rainwater intrusion. The BC-200A adopts a fully sealed housing, waterproof connectors and waterproof buttons, and passes a 1-meter water depth and 12-hour continuous waterproof test to ensure no water ingress into the internal circuits, meeting the long-term stability requirements for high humidity and high salt environments at sea.

1.2 Onshore Drilling:

It mainly needs to cope with sandstorms, dust and temperature variations, with relatively lower waterproof requirements (IP rating can be moderately relaxed), but a dust-proof design is also necessary. The sealing performance of the housing is still important, but deep-sea-level waterproofing is not required.

Explosion-proof and Intrinsically Safe

2.1 Offshore Platform:

The enclosed spaces on the platform are prone to accumulate flammable gases. Therefore, the equipment must have intrinsic safety and explosion-proof features. The BC-200A meets the explosion-proof standards due to its extremely low overall power consumption (approximately 150 μA) and the sensor signal current being only 5 μA, making it suitable for hazardous areas at sea.

2.2 Onshore Drilling:

The explosion-proof requirements are usually lower (unless in the high-risk area at the wellhead), and more attention is paid to conventional electrical safety.

Temperature and mechanical tolerance

3.1 The environmental temperature on offshore platforms fluctuates greatly (ranging from -20℃ to 60℃), and they also need to withstand platform vibrations. The BC-200A supports a working range of -30℃ to 70℃, which is suitable for extreme temperature differences.

3.2 The temperature range on land-based drilling rigs is similar, but the mechanical vibration intensity is generally lower than that on offshore platforms.

 

ⅡThe Difference Between System Integration and Interface Complexity

Multi-channel input and data integration

1.1 Offshore platform:

The mud system usually has multiple pumps (such as 3 pumps). The BC-200A supports 3 independent signal inputs, which can separately accumulate the stroke count of each pump and the total stroke count (0 - 99999), and can switch and display the pump stroke frequency in real time (0 - 999 times per minute), meeting the requirements of complex system monitoring.

1.2 Onshore drilling:

Single pump or dual pump are more commonly used, and the utilization rate of multi-channel functions is relatively low, but the hardware configuration is the same.

Interface with the platform control system

2.1 The offshore platform needs to be connected to the drilling control system (DCS), and pump stroke data should be transmitted in real time to the integrated interface of the driller's cabin. The pulse signal of BC-200A can be connected to the DCS through a distribution box (such as an explosion-proof distribution box), and it supports linkage with systems such as dynamic positioning (DP) and blowout preventer (BOP).

2.2 Onshore drilling is usually displayed independently or only connected to the local driller's station, and the interface requirements are relatively simple.

 

Ⅲ Differences in Installation, Maintenance and Operating Conditions

Cable length and wiring design

1.1 Offshore Platform:

The sensors are widely distributed (such as water-separating casings, mud pump rooms), with a standard configuration of 50-meter main cable + 25-meter branch cable (per sensor), and extended through explosion-proof distribution boxes to accommodate long-distance wiring on the platform.

1.2 Onshore Drilling:

The cable length requirement is relatively short (such as 50-meter main cable + short branch cable), and distribution boxes are not necessary.

Maintain convenience

2.1 The maintenance cost of offshore platforms is high. The BC-200A adopts a modular design, making battery replacement convenient (using two 3.6V lithium batteries), and the data can be retained even after power failure (loss of data occurs if the battery replacement takes more than 3 minutes).

2.2 Onshore environmental maintenance is more convenient, but there are consistent requirements for battery life (approximately 1 year) and display clarity (LCD requires lighting).

 

Ⅳ Differences in Function and Performance Parameters

Although the BC-200A is uniformly designed in terms of hardware, its practical applications have different focuses:

· For offshore platforms, they rely more on high-precision real-time data (such as fluctuations in pump stroke frequency reflecting well conditions), and require rapid responses (such as updates within 5 seconds) to avoid drilling accidents.

· For onshore drilling, they pay more attention to the long-term reliability of cumulative stroke count and have slightly lower requirements for real-time performance.

 

Core Difference Comparison Table

Dimension Offshore Drilling Platform Onshore Drilling Oilfield
Waterproof and corrosion-resistant Fully sealed and waterproof (IP67 standard) Basic dust and moisture protection
Explosion-proof requirements Intrinsic Safety (Low Power Explosion-proof) Conventional electrical safety
Multi-pump monitoring Requires 3 input channels and supports complex system integration. 1-2 output is commonly used and the integration requirements are low.
Cable configuration Long-distance + Explosion-proof Junction Box (50m + 25m * 3) Short-distance main cable (≤ 50m)
System Interface Deeply integrated with DCS, BOP, etc. Local display or simple driller's console connection

Environmental tolerance

-30℃ to 70℃, resistant to vibration and salt fog -10℃ to 60℃, resistant to sandstorms

 

The pump stroke counter of Xin Yulin is more focused on extreme environment protection, multi-system integration and high real-time performance when applied on offshore platforms. While onshore drilling focuses on basic protection and economy. The BC-200A adopts a unified high-standard design (such as waterproof, explosion-proof, multi-channel) to be compatible with both scenarios. However, for offshore deployment, additional attention needs to be paid to cable extension, system interfaces and cost optimization for maintenance.