ⅠPower Source and Working Principle
1.Pneumatic pressure testing device
1.1 Power source: Driven by compressed air (such as gas cylinders or gas bags), no external power supply is required.
1.2 Principle: The liquid is compressed by a pneumatic piston, and the output pressure is proportional to the air source pressure. When the gas-liquid equilibrium is reached, the pressurization automatically stops.
1.3 Advantages: Intrinsically explosion-proof, no risk of electric sparks, suitable for flammable and explosive environments (such as oil fields and chemical sites).
2.Electric pressure testing device
2.1 Power source: It relies on an electric motor for drive and requires stable power supply support.
2.2 Principle: The motor drives the worm gear or eccentric wheel to push the plunger to reciprocate, gradually increasing the liquid pressure.
2.3 Advantages: Precisely control the pressure increase rate through frequency conversion technology (for example, a stable pressure increase of 1.4 to 2.1MPa is required for low-pressure sealing tests).
ⅡOutput Performance and Efficiency Characteristics
|
Features |
Pneumatic pressure testing device |
Electric pressure testing device |
|
Pressure range |
300-600MPa (ultra-high pressure field) |
Up to 200MPa (such as Xinyulin DQST-200WBLP) |
|
Flow control |
Manually adjust the intake air volume and linearly increase the pressure |
Variable-frequency motor speed control results in a significant increase in displacement (the high-pressure displacement has increased from 84 L/h to 230 L/h) |
|
Continuous working ability |
Start/stop is unrestricted and there is no risk of overheating. |
The oil temperature needs to be monitored (for the gearbox, it should not exceed 80℃) to prevent high-load failures. |
|
Efficiency Case |
The pressurization cycle is relatively long (the efficiency of traditional pneumatic systems is low) |
The pressure test duration was shortened by 65% (for example, in the Chuan-Yu drilling project, it changed from 72 hours to 24 hours) |
Ⅲ Applicable Scenarios and Security
1.Applications of pneumatic pumps
1.1 High-risk environment: Areas with strict explosion-proof requirements such as blowout preventers in oil fields and chemical pipelines.
1.2 Mobile operation: Areas without power supply (such as remote well sites and emergency maintenance sites).
1.3 Automation integration: Easy to connect to a numerical control system for remote control.
2. Application scenarios of electric pumps
2.1 High efficiency requirement: Pressure testing of large-volume containers (such as well control equipment, large pipelines) relies on high-flow rate rapid liquid injection.
2.2 Precise control: Computer regulates the pressure curve and supports wireless remote operation (such as the design of Xinyu Linan explosion-proof house).
2.3 Safety limitations: It is necessary to avoid acidic and alkaline corrosive environments, and there is a potential risk of electric sparks.
Ⅳ Operation and Maintenance Costs
1 Pneumatic pressure testing device:
1.1 Operates without lubricating oil, reducing maintenance costs and avoiding oil-contaminated environment.
1.2 Lightweight structure, with low failure rate (no complex circuits).
2 Electric pressure testing device:
2.1 Regular lubricant addition is required for maintenance of the transmission components.
2.2 The failure rate is higher under high load (compared to traditional electric pumps), but it has been improved in reliability after optimization (such as the Xinyu Linyuan upgraded version).
Ⅴ Recommendations for Selection
|
Demand Dimension |
Recommendation Type |
Reason |
|
Explosion-proof / Electricity-free environment |
Pneumatic pressure testing pump |
Intrinsic safety, without reliance on power supply |
|
Ultra-high pressure test (> 200 MPa) |
Pneumatic pressure testing pump |
The pressure limit is even higher. |
|
High efficiency and large flow rate |
Electric pressure testing pump |
The displacement has been significantly increased and the cycle time has been shortened. |
|
Precise control / Remote operation |
Electric pressure testing pump (Intelligent type) |
Frequency conversion technology + wireless system |
The two types of equipment complement each other in terms of technical paths: pneumatic pumps excel in safety, while electric pumps are strong in efficiency. The upgraded case of the electric pump from Shenyang Xinyulin (such as increase in displacement/pressure, design of explosion-proof room) represents the optimization direction in high-demand industrial scenarios, while pneumatic pumps remain an indispensable solution for special environments.
