Shenyang Xinyulin Petroleum Machinery Co., Ltd. is a well-known enterprise in the domestic and international petroleum machinery field, especially in well control equipment and high-pressure test equipment. Our pressure test pumps (usually pneumatic test pumps or electric test pumps) are widely used in pressure testing in industries such as petroleum, chemical, boiler, pipeline, and pressure vessels due to their high pressure, stability, and durability.
To analyze the components of the pressure testing pump, we can start from the two core parts of the power end and the hydraulic end, as well as the control system and auxiliary system. Understanding these components is crucial for the operation, maintenance and fault diagnosis of the equipment.
I. Power End
The power end is the "engine" part of the pressure testing pump, responsible for converting the rotational motion of the prime mover (electric motor or pneumatic motor) into the reciprocating motion of the plunger.
1. Drive Motor / Pneumatic Motor
Function: Provide the original power. The electric pressure testing pump uses an explosion-proof motor, suitable for occasions with stable power supply; the pneumatic pressure testing pump uses a pneumatic motor and is powered by compressed air, with excellent explosion-proof performance, especially suitable for flammable and explosive environments such as oil fields and petrochemicals.
Key Points: The power of the motor (KW) or the gas consumption of the pneumatic motor, and the working pressure are the key factors in selection. Xinyujiuli's pneumatic pressure testing pump is its strong point.
2. Reducing mechanism (worm gear/worm wheel/gear)
Function: Reduces the rotational speed of the motor/motor while significantly increasing the output torque to meet the force required to drive the high-pressure plunger.
Key points: The pumps of Xin Yulin mostly adopt a transmission method of copper worm gears and alloy steel worm wheels. This structure has smooth transmission, low noise, and significant reduction and torque increase effects, and is one of the core components ensuring the pump head body generates extremely high pressure. Its wear resistance and lifespan are key to quality.
3. Crankshaft/eccentric wheel and connecting rod
Function: Converts the rotational motion of the reducing mechanism into the reciprocating motion of the connecting rod.
Key points: Usually made of high-strength alloy steel, it undergoes precise machining and heat treatment to ensure strength and durability under cyclic alternating stress.
4. Crosshead and slider
Function: Connects the connecting rod and the plunger, converting the oscillation of the connecting rod into a strict linear reciprocating motion, ensuring the coaxiality of the plunger movement and reducing wear.
Key points: This is a vulnerable sliding friction pair that requires good lubrication and wear resistance.
II. Hydraulic End
The hydraulic end is the "heart" part of the pressure test pump, responsible for drawing in low-pressure water (or oil) and discharging high-pressure water.
1. Pump Head Body
Function: The main structure of the hydraulic end, which contains cylinders, valve seats and other channels. It bears the entire high pressure output.
Key points: It is usually made by overall forging from high-strength stainless steel or alloy steel, and undergoes fine processing and flaw detection to eliminate any casting defects, ensuring absolute safety under ultra-high pressure.
2. Piston and Sealing Components
Piston: The key component that directly compresses the medium to generate high pressure. The surface is usually treated with super-hard chromium plating, having extremely high smoothness, hardness and corrosion resistance, to reduce friction and wear with the sealing components.
Sealing Components: The most core wear-prone part of the hydraulic end. It is usually composed of guide rings, packing (V-shaped rings, combined seals), etc., used to prevent high-pressure medium from leaking through the gap between the piston and the pump head body. The material of the sealing components (such as polytetrafluoroethylene PTFE, polyurethane PU, special engineering plastics, etc.) needs to be compatible with the test medium (water, oil, corrosive liquids).
3. Inlet Valve and Outlet Valve (Inlet Valve and Outlet Valve)
Function: A set of precisely coordinated one-way valves. The inlet valve opens during the suction stroke to draw in the medium; the outlet valve opens during the discharge stroke to discharge the high-pressure medium. They alternate opening and closing to achieve continuous pressure increase.
Key points: The fit between the valve ball (usually ceramic or high-strength alloy steel) and the valve seat must be extremely precise. Any wear or impurities getting stuck will cause internal leakage or inability to build pressure. This is a common failure point and maintenance point.
4. Safety Valve (Overflow Valve/Pressure Relief Valve)
Function: A crucial safety protection device. When the pressure exceeds the preset value, the safety valve will automatically open to relieve pressure, protecting the pump and the tested equipment from explosion due to excessive pressure.
Key points: The opening pressure of the safety valve must be regularly checked to ensure its accuracy and reliability. It is strictly prohibited to adjust or cancel this function at will.
III. Control System and Accessories
1. Pneumatic Control System (for pneumatic pressure testing pump)
Main components include: air source treatment triplex unit (filter, pressure reducing valve, oil mist generator), pneumatic directional valve, throttle valve, etc.
Function: Control the start and stop of the pneumatic motor and its rotational speed (i.e., the pump's flow rate), and achieve remote control.
2. Pressure Control System and Instruments
Pressure gauge/Digital pressure gauge: Used to display the current pressure value precisely and in real time. High-precision pressure gauges ensure the accuracy of test results.
Pressure sensor: If the pump is equipped with an automatic stop pump, electrical contact pressure gauge or computer control system, pressure sensors are needed to collect electrical signals.
Unloading valve/Manual relief valve: After the test, used to slowly and safely release the high pressure in the pipeline and the tested container.
3. Water tank and filtration device
Function: Store the test medium (usually clean water) and filter it to prevent impurities from entering the pump, and prevent wear on the piston, seals, and valve ball seats.
Key point: Using clean medium is the most effective way to extend the lifespan of all vulnerable parts of the hydraulic end.
Summary: Wearable Parts and Maintenance Points
For the pressure test pump of Shenyang Xin Yulin, the main components (wearable parts) that users need to pay close attention to and replace regularly are:
Hydraulic end sealing assembly (plunger seal): The most common replacement part, leakage is the main failure mode.
Inlet and outlet water valves (valve balls, valve seats): Internal leakage occurs due to impurities in the medium or fatigue wear, manifested as inability to increase pressure or continuous pressure drop during pressure maintenance.
Safety valve: Regular calibration is required to ensure its safety function.
Lubricating oil: Regular inspection and replacement of the lubricating oil in the power end worm gear box.
Maintenance suggestions:
Use clean medium: This is the most important guideline.
Regular lubrication inspection: Ensure good lubrication of all moving parts of the power end.
Slowly increase/decrease pressure: Avoid pressure shock that may damage the instrument and internal components of the pump.
Long-term shutdown: Drain the water in the pump and pipeline to prevent rusting.
We hope this detailed component analysis will help you better understand, use and maintain the pressure testing pump produced by Shenyang Xin Yulin Petroleum Machinery Co., Ltd. If you need specific component models or for purchasing, please contact us directly.
