For perfect operation of the control panel, it is necessary to install it correctly. Some recommendations regarding the right installation of the manifold and its control panel includethe following:
- If you are not using the remote control panel, the choke must be installed outside the rig. However, if you use the choke manifold control panel for remote operation, you can install it in an inaccessible zone with the control panel in an accessible zone.
- You must operate all the drilling chokes of the system with hydraulics using the control panel. It will ensure stable drilling performance.
- The choke manifold and control panel must deliver all the information to the system for efficient automation. This data includes pump strokes, casing pressure, and drill pipe pressure.
- The control panel must be used to track fluid temperature in the manifold, which must be heated to prevent the manifold from freezing.
- Use the control panel to maintain the same working pressure for the upstream valves and the chokes, as well as the working pressure of operational ram BOP's
With these tips, the choke manifold can be utilized much better, thanks to the remote operating control panel. However, for the best operation, getting the right control panel with all the required specifications is necessary.
