Basic Structure Of Stop Valve

Feb 29, 2024 Leave a message

The stop valve is a valve that uses the valve stem to move the valve head, thereby changing the distance between the valve disc and the valve seat to achieve opening and closing control. The stop valve is the most widely used shut-off valve in chemical production. In actual production, the stop valve is mainly used to control pipelines such as water, steam, and compressed air, but it is not suitable for materials with high viscosity and easy to crystallize.

 

The structure of the stop valve is relatively complex, but the actual operation is simple and labor-saving. It has good performance in regulating flow and shutting off channels. The opening and closing speed is slow and water hammer phenomenon rarely occurs. The stop valve has a compact structure and a more obvious appearance. The top of the valve is equipped with a handwheel and a valve stem, and the middle is equipped with a thread and a stuffing box sealing section.

 

The main way to judge the opening and closing state of the stop valve when it is in use is to observe the height of the valve stem exposed from the valve cover to control the operation of the valve. There may be a gap in the part where the valve stem and the valve cover are connected, which is prone to medium leakage. This can be solved by packing seals. The valve stem thread of a small stop valve is set in the valve body, so it is more in contact with the medium for a long time during use and is easily corroded by the medium.